In addition, after the installation of the sunshade , some people will

Contact us

cooperationlike@gmail.com

Cixian County in the building to meet the design requirements of the premise, the addition of external sunshade, awning and appropriate increase in the length of the southward balcony can play a certain sunshade effect. Heat-reflecting fabric curtains coated with metal film are arranged on the inside of the window, which has a decorative effect on the front, forming a less mobile space layer about 50mm thick between the glass and the curtains. In this way, a good effect of thermal reflection and thermal insulation can be achieved, but the direct lighting is poor and should be made into a movable type. In addition, installing blinds with certain thermal reflection on the inside of the window can also obtain a certain thermal insulation effect.

The above are the heat preservation measures of solar greenhouse in winter. The work of greenhouse needs the cooperation of all kinds of equipment. With the increasing demand for temperature, especially in autumn and winter production, external sunshade system, internal thermal insulation system, window opener, fan, wet curtain all need to be applied.

Sunshade, also known as sunshade, its function is to further prevent sunlight from coming into the car and reduce the temperature of the air in the car; at the same time, it can also protect the privacy of car owners under specific circumstances. The sunshade panels on the market range from a few yuan to dozens of yuan, and the materials are generally made of chemical fiber woven products and all-plastic films.

To maintain the battery, be sure to bury the battery deep under the protection. Other parts of the vehicle include some air conditioners, lamps, etc., do not directly maintain the vehicle in accordance with the requirements, should rotate the air conditioner (such as light bulbs) and rotate the air conditioner clockwise several degrees. Open the sunshade of the car body in summer, then separate the air conditioner from high and low, and then drive the car to the lower position, two laps, two laps up, in the design of the branches to find the place of ventilation, the electric warm wind can be determined. The maintenance time of each part of the new car in all directions is 15 minutes, which can quickly find out the good effect in a short time. The process of each maintenance is: every delivery inspection, to the highway, any automatic car driver must master the vehicle maintenance knowledge, must not blindly reduce fuel consumption.

The general operating procedure for dashboard cleaning is to clean the dashboard with a dishcloth, and then treat the plastic part of the dashboard with detergent. Finally, use detergent to treat the rest of the dashboard. It should be noted that in the process of dealing with the dashboard, sunshades are used to protect the dashboard from being spoiled by sunlight.

First-class package configuration: body color door handle, front door accent lighting, full-length advanced upgrade floor console, heating steering wheel, internal auxiliary handle, IPLED environment light tube, leather trimmed barrel seat, 4-way headrest, bucket seat, front heating seat, front seat backrest map pocket, electric four-way drive waist adjustment, electric four-way passenger waist adjustment, rear 60tap 40 split folding bench, luxury front door trim panel, Mopar Carton lighting, electric 8-way driver / passenger seat, power adjustable pedal, advanced package dashboard, rain sensitive windscreen wiper, rear door accent lighting, rear seat compartment storage space, rear window defroster, sunshade with illuminated cosmetic mirror, general garage door opener with 12-inch display

In addition, after the installation of the sunshade, some people will install an organic “windshield” in the front. When cycling out at night, both car lights and street lights will be refracted through the glass, making it difficult to see the road. When it rains, it is even more troublesome, not only can not completely play the role of rain shield, water droplets stick to the glass, the front can not be seen clearly, increasing the risk.

After the rubber joint is subjected to pressure for the first time (such as installation and pressure test, etc.) or before it is reactivated after long-term shutdown, the bolt should be tightened again and put into operation. The effective expansion deformation of the bellows of the working main body is used to absorb the size changes caused by thermal expansion and cold shrinkage of pipelines, ducts and containers, or to compensate the axial, lateral and angular displacement of pipelines, ducts, containers, etc. The use or storage of Weihai integrated water processor should avoid high temperature, ozone, oil and acid-base environment. Sunshade racks should be built for pipes used outdoors or facing the sun and the wind, and exposure, rain and wind erosion are strictly prohibited. Paint and winding thermal insulation materials are strictly prohibited on the joint surface. Due to the aging problem of rubber products, it should be inspected and replaced in time. The benefits of this: first of all, the working pressure: the commonly used rubber joint pressure has the same size.

Scroll to Top