clips for car sunshades

Contact us

cooperationlike@gmail.com

2. Sunshade. The membrane structure parking shed adopts polycarbonate material with high impact resistance, and its strength is about 200 times that of glass. The raw materials are imported from Germany and processed in China. Through the double-sided co-extrusion process, the anti-ultraviolet material (UV) is added, which can effectively block more than 98% of the ultraviolet rays, protect the car surface paint, effectively control the continuous rise of the interior temperature, and in direct sunlight. The temperature in the car can reach more than 60 ℃ and can be effectively reduced to about 40 ℃ after installation. At the same time, it also has flame retardant effect, and can be used normally for more than 30 years in the environment of-30 ℃ to 60 ℃ (137 ℃ thermal deformation). The downcomer is made of high-strength aluminum alloy and has a unique user-friendly design to avoid the second pollution to the car and you when the roof water falls to the ground. The structure is reasonable and easy to clean, and it is convenient for the membrane structure parking shed to remove dirt in the pipe.

Jinan District Holiday House Electric curtains how much to inquire, 6. Energy saving and environmental protection: electric shutter windows can achieve the appropriate indoor temperature by adjusting sunshade, which can effectively reduce the heat load of air conditioning, absorb solar radiation energy and reduce heating load in winter, thus playing the role of energy saving and consumption reduction. 5. Heat preservation and heat relief: electric curtains can effectively prevent strong outdoor light, maintain a steady state for indoor temperature, and are more suitable for work.

Even more impressive is the compact interior. the recycled cork-a material that absorbs carbon dioxide during production-has been used on the tops of dashboards, sunshades and doors-as an alternative to traditional foam materials. all other decorative panels were omitted and the exposed basic metal structure was painted blue.

(4) the form of baffle sunshade can effectively block the sunlight of orthographic window with small height angle. Therefore, it is mainly used for east-west glass curtain wall construction. ? The shading system also brings different levels of influence on indoor lighting, ventilation and winter sunshine. At present, there is a kind of sunshade lighting system, which adopts a combination of sunshade plate and light guide plate, which is generally in the form of installing a horizontal sunshade facility on the upper part of the building glass curtain wall or window. Its function can not only directly hinder the direct light and heat of the sun, but also indirectly use the sunshade design to reflect sunlight to the ceiling, and then direct natural light into the depths of the room through the ceiling.

The sunshade and heat preservation system on the top of the greenhouse. In order to improve the adaptability of the system, greenhouse construction manufacturers, so that it can be extended to most of the solar greenhouse built in the northwest, Gansu greenhouse construction, the system uses steel cable drive mechanism. Its working principle is that the motor drives the drive shaft to run, and the tight wire sleeve on the drive shaft turns the circumferential motion into linear motion. The aluminum drive card connected with the drive line drives the driving side aluminum profile to move parallel on the curtain line through the word connection, and the driving edge aluminum profile pulls one end of the curtain slowly to unfold and fold, that is, after all is folded, the opening and closing limiter switch is triggered respectively, the motor stops, and the operation is over.

The structure of the window should be able to control sunlight exposure and limit the area ratio of the window wall. For buildings with larger window area, endothermic glass, heat reflection glass or shading measures should be considered, such as sunshade panels, eaves, eaves, balconies, blinds, curtains and so on. Natural air can be directly used as a source of energy when the outdoor temperature is low, so the structure of the window should be able to open or set a natural vent on it.

The sun board integrates daylighting, thermal insulation and sound insulation, which can be used for greenhouse, furniture canopy, office sound insulation, outdoor advertising light box and so on. Foreign countries even appeared in addition to the supporting structure, pure polycarbonate material of large-scale lighting house, a sunshine, crystal transparent, warm and pleasant. In terms of greenhouse construction, there are greenhouses built with sunboards, gables and sidewalls using sunboards; as for greenhouses, there are production-oriented greenhouses, trade greenhouses dominated by flower trading centers, and greenhouses dominated by scientific research. Sunpanels are a widely used building material and can also be used in sunshades and canopies.

At present, spray-free materials have been successfully used in side skirts, central control panels, DVD panels, glove boxes, sunshades, instrument panels and other automotive parts in the automotive field.

Textile materials suitable for ultrasonic processing: which materials are suitable for ultrasonic processing, including synthetic fibers, such as nylon, polyester, polypropylene, some polyethylene, modified acrylic resin, some vinyl compounds, carbamate compounds, film, coated paper, etc. It also includes synthetic fibers mixed with 35-50% non-synthetic fiber components. Such as: speakers, dashboards, folders, lamps, vacuum cleaners, filters, electric mosquito rackets and so on. Double-head ultrasonic plastic welding machine, can give full play to its welding effect when welding hard plastic materials, ultrasonic welding machine, special scope: used for car body plastic parts, car doors, car instruments, headlamps, mirrors, sunshades, interior decoration, filters, plastic electronic products: prepaid water meters, electricity meters, communication equipment, cordless phones, mobile phone accessories.

The overhead ventilated roof is widely used in hot summer and cold winter areas in China, especially in the hot and rainy summer, which shows its superiority. The principle of the ventilated roof is to set up a ventilation room layer on the roof. On the one hand, the outer layer of the ventilation room layer is used to block the sun, such as a closed or ventilated air room layer, and the sunshade intercepts the sun directly shining on the roof. The radiant heat makes the roof heat transfer twice, avoiding the direct action of solar radiant heat on the enclosure structure, on the other hand, using the effect of wind pressure and hot pressure, especially natural ventilation, the solar radiant heat absorbed by the upper and lower surfaces of the sunshade in contact with the air is transferred to the air with the wind. The greater the wind speed, the more heat the roof takes away, and the better the thermal insulation effect is, the greater the thermal insulation capacity of the roof is. So as to reduce the effect of outdoor heat on the inner surface.

Scroll to Top