of thermal insulation, but also installed a sunshade system. This series of

Contact us

cooperationlike@gmail.com

◆ 2 is to protect against cold and keep warm. Pay attention to the heat preservation of vegetables, check whether the greenhouse film is broken or not, close the shed timely in the morning and evening, properly uncover the film and ventilation when the temperature is high, adjust the temperature and humidity in the greenhouse, and increase the light. After the air temperature drops below 5 ℃, we should take multi-layer covering and heat preservation, and if necessary, take measures such as electric heating, emergency lighting, etc., especially to do a good job in the heat preservation of vegetable seedling places. Open-field vegetables can be tied around the waist, floating surface covering sunshade net, straw and other anti-freezing.

For outdoor swimming, it is best to use a sunshade after landing, or go to a shady place to rest, or use a bath towel to protect the skin, or apply sunscreen in the exposed parts of the body. You should wipe off the scale with a soft dry towel immediately after swimming, preferably rinsing with fresh water. If there is water in the ear, one foot can be used to “jump on the same side” to discharge the water. After that, do a few relaxation exercises and body massages, or take a 15-minute nap in the sun for 20 minutes to avoid muscle rigidity and fatigue.

Conclusion: if you want to breed well, enclosure is very critical, so you should consider it at the beginning, all kinds of facilities are well prepared, and at the same time, you have to ensure internal ventilation and temperature. Do a good job of keeping warm in winter, while building a sunshade or planting some trees to keep out the shade in summer can lower the internal temperature. In this way, we can effectively avoid getting sick because of environmental problems, and internal disinfection is also very critical. Build a relatively large disinfection pool, drive them inside regularly, and do a good job of disinfection. At the same time, some drugs should be sprayed regularly in every corner. It is guaranteed to provide the most suitable residence without damaging the ecological environment, which can improve its quality and ensure faster growth at the same time.

1. Do a good job of cold resistance and anti-freezing measures. For Fritillaria thunbergii, Yuanhu, saffron and other traditional Chinese medicine, can cover straw, sunshade net and other anti-freezing. Control the water content of Dendrobium candidum matrix, seal the greenhouse film, prevent cold air from entering the greenhouse, and multi-layer covering can be used in the greenhouse. For breeding seedlings, potted flowers and some Lunar New year Flowers and precious flowers, it is necessary to do a good job of heat preservation in the shed, and lilies and Lunar New year flowers need to strengthen heating measures, especially when low temperature comes, pay attention to watch at night and heat up continuously to prevent frost damage caused by sudden changes in temperature in the shed. For the gerbera produced in the simple greenhouse, when the low temperature freezing comes, the film needs to be added to resist the low temperature, and a layer of non-woven cloth can be added in the greenhouse to enhance the thermal insulation performance.

of thermal insulation, but also installed a sunshade system. This series of

Although the solar greenhouse has a very good thermal insulation performance, but from the point of view of safety, heating equipment is still an important factor. The southern part of our country generally does not need to heat up, but if we encounter bad weather continuously, we still need to use the energy stored in the greenhouse itself, otherwise it will not be able to meet the growth of vegetables. Therefore, whether in the south or north, heating equipment has always been a necessary protective measure. The technical aspect requires that in the equipment configuration of solar greenhouse, the configuration of thermal insulation equipment should be demonstrated in great detail. Of course, the work of Bengbu vegetable greenhouse needs the cooperation of a variety of equipment, with the increasing temperature requirements, especially in autumn and winter production, external sunshade system, internal thermal insulation system and window opener and fan, wet curtain and other equipment need to be applied. For more information about the cost of vegetable greenhouse in Bengbu, please contact Minghao greenhouse Engineering Construction Company directly.

At present, spray-free plastics have been successfully used in side skirts, central control panels, DVD panels, glove boxes, sunshades, instrument panels and other automotive parts in the automotive field. Bioplastics bioplastics are produced by using original plants as raw materials, such as sugar cane and corn, under the action of microorganisms. Commonly used plastics generally use petroleum products, and there are often small molecular harmful substances that do not fully react, while bioplastics, due to the use of low-toxic and low-harm renewable raw materials, greatly reduce the VOCs volatilization in the car after turning it into automobile interior parts. In addition, this bioplastic can be used for subsequent use, and is a more environmentally friendly type of plastic.

for dashboards, door panels, console modules, sub-dashboards, roof storage boxes, sunshades, roofs, air outlets and air conditioners, body parts and other interior components.

When the vehicle is parked, as long as the attached sucker or rely on static electricity, the sunshade can be sucked on the front and rear windshield, which can effectively protect the dashboard, leather seats and other interior equipment while preventing direct sunlight from raising the temperature in the car. At present, in addition to the single sale of front windshield aluminum foil sunshade, but also launched a special car customization service, including windows, rear windshield and other locations, the price is not expensive, only tens of yuan to hundreds of yuan.

The total amount of energy consumption of a building is mainly affected by various energy-using equipment inside the building and the external enclosure structure that constitutes the building. Due to the vigorous implementation of building energy conservation in China in recent years, the construction technology of building energy equipment and external enclosure structure has undergone profound changes. For example, the roof in the building enclosure structure has evolved into a roof with thermal insulation effect. The external walls also increase the performance of thermal insulation, while curtain walls, doors and windows not only have the performance of thermal insulation, but also installed a sunshade system. This series of energy-saving measures not only improve the working efficiency of the equipment, but also explore and develop some new energy or renewable energy, so the building construction technology needs to be developed and improved synchronously. The author briefly describes the new materials and technologies of building energy saving, as well as their application in construction.

of thermal insulation, but also installed a sunshade system. This series of

(3) the combination of glass canopy and stainless steel sunshade makes use of the characteristic that stainless steel is a poor conductor of heat, and takes away the solar radiant heat through the air flow caused by hot pressure and wind pressure between the two, so that the canopy system can play a role of heat insulation. make the building more energy-efficient.

Sunshade cosmetic mirrors are already common in models at this price, but the lighting function is intimate. The floor accelerator pedal is also different from the conventional model, which helps the driver to control the vehicle more accurately. Although external audio is popular nowadays, Mazda 3 Onksera not only supports MP3 and WMA playback, but also provides a single disc CD function, which can be called a “welfare” for nostalgic consumers. The control panel behind the block is used to set all the information in the central control screen, and the functions such as multimedia, navigation and system favorites are designed with independent buttons, which is worthy of recognition.

Scroll to Top